What is the treatment method of the edge of the diamond chain link fence

The hook wire of the chain link fence is a feature. It does not need to be welded or welded to make the mesh into a whole body, but there is also a disadvantageous aspect. The edge of the chain link fence and the edge of the folded chain link fence will always encounter some troubles. In many cases, the 180-degree bend of the edge of the chain link fence will always hook the adjacent nets during the transportation process, or it is difficult to open the entire roll of nets, causing a lot of inconvenience.

In view of this situation, the chain link fence factory summarizes:

1. If there is no bundle (roll) of the folded chain link fence, the number of meters should not be too long;

2. In the currently known chain link fence, the mesh used is generally pided into two types: woven mesh and welded mesh. Since the chain link fence mesh is generally relatively long (about 2.5 meters), the mesh is in the horizontal direction (that is, the mesh

The direction of the cross bar) is weak, and the problem of lateral vibration often occurs, and the ability to prevent damage is relatively poor. Most domestic solutions are to process various transverse grooves on the mesh to increase the strength. but

This structure has higher requirements for manufacturers of mesh production, and requires certain technical and equipment support, and this structure is not suitable for welding mesh applications of thicker steel bars (rebar diameters above 5).

3. When the chain link fence is hemmed, every edge bend must be processed in place; the folded chain link fence should be shrunk, and the head should be blocked to prevent the edge of the chain link fence from contacting other adjacent nets. ；