When installing the
stainless steel mesh belt, you need to pay attention to the tightness of the stainless steel mesh belt. Too loose or too tight will affect the service life of the stainless steel mesh belt. Therefore, it is necessary to adjust the tightness during the installation.
1. When the stainless steel mesh belt device is too tight, the contact pressure between the mesh belt and the machinery and equipment will increase, and the degree of wear will increase, which will cause the deformation of the stainless steel mesh belt. In severe times, the stainless steel mesh belt will also occur. Cracking can sometimes cause damage to the machine bearings or needle rollers, and it is also not conducive to normal maintenance and protection.
2. When the belt device is too loose, the stainless steel mesh belt simply falls off, which will affect the quality of the processed goods. It will fall off during processing, causing the machine to stop working, which will reduce the processing power and bring about processing. A lot of trouble.
The device of the stainless steel mesh belt should be tight and fit, not too tight, and not too slack. This is not good, the tightness is suitable, and the talent is very good to ensure the normal operation of the machine.