There are bleaching agents and various acids attached to the surface of the
stainless steel mesh. Rinse immediately with water, then soak with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water. The rainbow pattern on the surface is caused by excessive use of detergent or oil. It can be washed away with mild detergent in warm water. Rust caused by dirt on the surface of stainless steel can be washed with 10% nitric acid or abrasive detergent, or with special detergents. The correct maintenance method of stainless steel mesh can extend the service life of stainless steel and maintain its clean, bright and gorgeous style.
In the passive film on the stainless steel surface, the weak corrosion resistance is formed due to the self-excited reaction and the formation of small pores, coupled with the approach of chloride ions, a strong corrosive solution is formed, which accelerates the rate of the corrosion reaction. There is also intergranular corrosion cracking in the stainless steel, all of which have a destructive effect on the passive film on the surface of the stainless steel. Therefore, the stainless steel surface must be regularly cleaned and maintained to maintain its gorgeous surface and extend its service life.
When cleaning the stainless steel surface, you must be careful not to scratch the surface. Avoid using bleaching ingredients and abrasive detergents, steel balls, abrasive tools, etc. To remove the detergent, rinse the surface with clean water after washing.