How to install the green mesh fence more firmly?

How to install the green net fence more firmly?
 

Green mesh fences can be installed on flat ground or on low walls.When installing green mesh fences on flat ground, first look at the terrain and avoid underground facilities.

⑴First pull the wire to determine the length, and determine the distance from the pit to the pit: According to the length of the fence from the middle to the column, if the size of the fence is 1.8×3 meters, then the distance from the pit to the pit is 3 meters. The midpoint of all pits can be marked with a tape measure.

⑵ Generally speaking, if the guardrail is not particularly high or specially required, we generally pre-bury 30 cm, and can dig a 30X25X25cm pit.

(3) Place the column, fill soil or concrete: In order to prevent the column from skewing, you can use a fixed object to support the column. At this time, you can measure the position of the column to the column again. If it is not right, you can fine-tune the column. If it is to make the guardrail stronger, you can fill the pit with concrete, and then install the mesh after the concrete is dry.

⑷Install the mesh: Determine the position of the mesh. If it is 10 cm from the ground, you can make a mark on the column, and then align the ears on the column with the double wire on the edge of the mesh and fix it with screws.

⑸By analogy, install the remaining mesh

To install the green mesh fence on the low wall, you can use flange columns or straight pipe columns. The flange columns can be fixed to the cement floor with expansion bolts. Finally, if the green mesh fence is used as an isolation protection, it must be used during construction. Attach importance to the combination of construction preparation and pile driver, constantly sum up experience, strengthen the construction management of green net fencing, and ensure the installation quality of green net fencing.