How to choose stainless steel wire for woven wire mesh

The diameter of the stainless steel wire used for weaving wire mesh is usually selected according to the specific application requirements and mesh density. Different mesh sizes and uses require stainless steel wires of different diameters. The following are some common stainless steel wire diameter specifications for reference when weaving wire mesh:

Common stainless steel wire diameter specifications:

Diameter: 0.5 mm - 5 mm

Common specifications: 1.0 mm, 1.2 mm, 1.5 mm, 2.0 mm, 2.5 mm

Mesh density and use:

Coarse mesh: Usually thicker stainless steel wire is used, such as diameter greater than 2 mm, for fences, safety nets, etc.

Fine mesh: Thinner stainless steel wire is required, such as diameter less than 1 mm, for screens, filters, etc.

Special requirements:

For some special needs, such as protective nets, screening nets, etc., it may be necessary to customize stainless steel wires with finer or thicker diameters.

When choosing a suitable stainless steel wire diameter, it is necessary to consider factors such as the use environment of the wire mesh, the pressure it bears, and the corrosion resistance requirements. Usually, manufacturers or suppliers will provide corresponding stainless steel wire specifications and diameter selection recommendations based on the specific needs of customers.