Generally, chain link fences are used for the fence of the court. The wire diameter is generally used at 5, 8, and 0. The size of the mesh is generally used at 5 cm and 6 cm. In between, the edge of the chain link net can be treated so that it can be gripped or twisted. These standards are the most commonly used for the fence of the court.
Then hang the chain link net on both ends and tighten the cap. After the first row of anchor net support is installed, it is required to proceed in sequence according to the above-mentioned sequence, until the row of anchors close to the head does not exceed one row of anchors. Stadium fences are generally selected by chain link fences, and the surface treatment of chain link fences used in courts is generally dip or spray treated. Detailed standards and types can be customized according to customer requirements. What standard of chain link nets are used for flower fence nets?
Chain Link Fence is widely used in various fields due to its usefulness, Chain Link Fence, Feeding Chain Link Fence, Slope Chain Link Fence, Enclosure Chain Link Fence, etc. Sometimes, in order to reduce costs more, customers can order chain link When ordering nets, I only order chain link nets and fixed posts, and I want to make them myself. So does chain link fence have a unique column? Chain link fence can not only form a chain link fence, but also a good protective barbed wire for independent use.
There is a special column in the column, which is a hook on the column. At the fixed time, we will straighten the net surface and fix it on the hook of the column. It is convenient and simple, and the price is not expensive. Reinforced or iron pipes or cement columns are more professional and useful.
Chain link fences sometimes have columns and borders, but sometimes there are no borders when chain link fences are used independently as fences. As long as the columns are fixed, chain link fences that are used independently at this time are used as fences. In the center of the face, a metal wire runs through the entire mesh surface. Of course, this metal wire sometimes appears in the center and sometimes on the upper and lower ends of the mesh surface. So what effect does this metal wire in the center have? When the chain link fence is used independently as a fence, this metal wire has the effect of supporting the net on the one hand, and the same effect as the frame on the other.
Chain link fence is also called anchor net in the use of coal mines. When anchor net is used, first set the anchor rod. After the anchor rod is set, you must first knock on the top, carefully check the surrounding rock condition of the top, and find the live rock. Dangerous rock, after acknowledgement of safety, remove the back plate on the front exploration beam in the order of inside out, first two ends, then the center, remove the dangerous rock and live rock, place a chain link fence on the front exploration beam, and then Remove the disc cap that is close to the second anchor rod at the top, adjust and hang the chain link net according to the even length of both ends and the overlap length of 100mm, and tighten the disc cap.