Galvanized Chain Link Fence Packaging and Transportation

Galvanized chain link fence uses special raw materials in production to change the production shape of galvanized chain link fence into the current situation. Regarding the delivery status of galvanized chain link fence, it should be shipped and packaged according to the special product characteristics of the chain link fence. The special width of the galvanized chain link fence has created a special method for transporting the galvanized chain link fence. The galvanized chain link fence is machine-threaded.

    The fluidized bed used in powder coating is classified as "vertical fluidization". The fluidization number must be found through experiments. Generally, it can be applied. The suspension rate of the powder in the fluidized bed can reach 30 ~ 50. percent. Chain link fence chemical corrosion refers to the corrosion caused by direct chemical reaction between steel and surrounding media. Most corrosion is oxidation, which causes the appearance of lax oxides on the steel.

    At room temperature, a thin passivation oxide protective film FeO is formed on the appearance of the steel. It is loose and easily cracked. Harmful media can enter further and reverberate to cause corrosion. In a boring environment, corrosion develops slowly, and the degree of response increases with the addition of temperature and humidity. Chain link fence electrochemical corrosion is caused by the galvanic appearance of gold.

    There are many artificial nets, so the width of galvanized chain link fence is also very sensitive. The narrowest enough chain link fence can reach 10cm, and the widest stainless steel chain link fence can reach 6m. The transportation process is very difficult. Generally, the 6m wide galvanized chain link fence is mainly used for mountain protection. The better width makes the installation process faster and eliminates many side connections.

    PVC chain link fluidized bed is the second stage of solid flow (the first stage is the fixed bed stage, and the second stage is the air transport stage). The flow rate (W) is continuously increased on the basis of the fixed bed. Swelling and loosening, the bed height is added at the beginning, and each powder particle is floated, so it moves to a certain degree from its original orientation, and then enters the fluidized bed stage.